Safety Appliance Application (K1)
The system builds the measurement environment and provides the physical equipment as: rangefinder, anemograph, toxic and hazard gas detector, differential pressure gauge, loadometer, etc.; the system sets various different measurement points for each instrument. The test should carry out the operation at the dedicate measurement point and the system would automatically scoring.
Rangfinder and Anemograph Operation (K11)
Dust Gauge and Toxic and Hazard Gas Detector Operation (K12)
Differential Pressure Gauge and Loadometer Operation (K13)
Safety Operation Technology (K2)
This segment designs the test topic according to the test standard and scores automatically while adopting the combination of the physical operation desk with the virtual scenery.
Draught Fan Operation and Reversal Operation (K21)
Draught Fan Operation Situation Inspection (K22)
Draught Fan Control Adjustment (K23)
Draught Fan Frequency Control Operation (K24)
Local Ventilation Equipment Installation Operation (K25)
Operation Site Potential Safety Risk Elimination (K3)
Local Working Face Potential Smoke Risk Elimination (K31)
The tester selects the suitable safety protective appliance and measurement instrument from the tool cabinet and the system checks automatically if the selection is correct. The operation simulation could be carried out by clicking the corresponding article in the 3D scenery to eliminate the potential smoke risk.
Stope Polluted Air Serialization Potential Risk Elimination (K32)
The tester needs to check air output, return air volume, polluted air source and so on of the stope polluted air serialization to eliminate the potential polluted air serialization risk.
Operation Site Emergency Handling (K4)
Blasting Fume Poisoning Emergency Handling (K41)
Once the tester spots the blasting fume poisoning accident, he should firstly simulate the report operation at the test terminal and then select the safety protective appliance from the tool cabinet and wear it; in the end, he should go to the accident area to move the simulated human-being to the dedicate safety area. The system monitors and collects the tester operation information and scores.
Underground Fire Emergency Handling (K42)
The operation platform displays the simulated underground fire scenery. Facing the large fire scenery, the tester should simulate the accident report procedure using the operation platform; he should cut off the electric equipment of the fire site, select the correct ventilation method, fire extinguishment method, emergency escape itinerary, etc. While facing the small fire scenery, the tester could select the fire extinguisher to carry out the fire extinguishment operation.
Draught Fan Fault Emergency Handling (K43)
The tester should carry out the accident simulation operation, draught fan first-aid repair and underground escape on the test terminal.
Self-rescuer Application (K44)
This segment is equipped with the physical self-rescuer automation test equipment.
The tester wears the self-rescuer according to the standard operation and the system monitors and collects the operation information in real-time for scoring.
The official WeChat
400-8369669
